Ideas for Set-ups for someone who has too many drum machines

[Chicago Skyway Music]

Hey all,

So I have 4 Drum machines and you know drum machines aren't small. I'm trying to figure out a creative way to put them all together using minimal amount of space (i.e. in the corner of a room).

Any ideas or suggestions?

And before some of you knuckle heads come on here talking about "Get rid of them" No, that is not an option. :P

Thanks.

[djfunq]

Hey all,

So I have 4 Drum machines and you know drum machines aren't small. I'm trying to figure out a creative way to put them all together using minimal amount of space (i.e. in the corner of a room).

Any ideas or suggestions?

And before some of you knuckle heads come on here talking about "Get rid of them" No, that is not an option. :P

Thanks.
Stack em, there are special stands for. Never saw them on stage where guys have stacked 3 synthesizers above eachther.
-
Which one do you have? Roland series?

[GrantB]

I've seen them in rack drawers and custom wood drawers. Also you can mount them slanted or vertically on the wall with some shelving systems. If you have them all on a table, you can build little shelves for the ones in back so the machines in front slide under just enough that you can still see the controls.

[GrantB]

Hey this is a good thread to post my favorite youtube video... again ;)

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/TMx-5xcAs_0&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TMx-5xcAs_0&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[djfunq]

Hey this is a good thread to post my favorite youtube video... again ;)

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/TMx-5xcAs_0&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TMx-5xcAs_0&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
hail :hail: hail
Busy as we speak.
Here's a pic.
1933

[Ashwell]

A two teired keyboard stand and with boards and two machines on each teir would be a quick n' dirty solution.

But I like the idea of putting them on wall slant racks - at least two of them - and then you could have a flat shelf underneath for the other two.